Bloodstain Pattern Analysis is the forensic interpretation of human blood evidence in crime scene investigations. It’s used to recreate actions that caused the bloodshed. Because blood has chemical properties that behave according to specific laws, trained analyists can examine the size, shape, and distribution of bloodstains to draw conclusions of what did—or did not—happen.

Bloodstain Pattern Analysis (BPA) applies the sciences of anatomy, biology, chemistry, mathematics, and physics to answer questions like:

• Where’d the blood come from?

• Who’d it belong to?

• How’d it get there?

• What caused the wound(s)?

• From what direction was the victim assailed?

• How were the victim and perpetrator positioned?

• How many victims and perpetrators were there?

• What movements were made after the bloodshed?

You’ve seen the CSI shows where investigators, dressed in their ‘bunny suits’, photograph drops, streaks, smears, and pools of blood, then swab for DNA and String the room back to Area of Convergence points. Well, that’s pretty much how it happens, except today most Stringing is done by 3D computerization.

Bloodstain pattern interpretation is nothing new. It’s been around two hundred years and became increasing sophisticated as technology advanced. I’ve been involved in a number of BPA examinations during my time as a cop and coroner. One that really stands out was when Billy Ray Hennessey axe-murdered his ex-girlfriend and her new lover. The room looked like a bomb went off in a red paint factory. I’ll tell you more about it at the end of this article. First, let’s look at how blood behaves.

Blood has three components that are suspended in plasma.

Erythrocytes are your red cells that transfer oxygen through hemoglobin. It’s what gives blood the red color. Leukocytes, your white cells, are your body’s defenders and support your immune system in fighting infection and disease. Platelets are formed in your bone marrow and play a major role in hemostasis, or plugging up breaches in vessels.

Blood composition is about 55% plasma and 45% formed elements, or cells, which remain suspended due to agitation caused by your circulatory system. That’s called viscosity—it’s density or internal friction. Once blood leaves your body’s pressurized containment, it’s subject to the forces of gravity and surface tension which dictates its resting shape. That can be in drops, streaks, or pools.

Crime scene bloodstains take different forms due to factors like velocity and distance of travel, amount of blood flow, angle of impact, and type of surface or target it lands on. There are eight categories of bloodstain patterns:

Single Drop – These stains are typically from a vertical fall and under low velocity, like when your cut your finger and blood drips to the floor. Blood molecules are very cohesive. They attract and bind in a surface tension that makes a sphere. The drop stays in a ball until it strikes an object or a force acts on it. This is called bleed-out.

Impact Spatter – These result from forceful impacts between an object and wet blood, causing the blood to break into little droplets. Greater force produces smaller droplets. The study of impact staining provides huge insight into the relative positions of individuals and objects involved in the crime. There are three sub-categories of impacts:

1. Low Velocity Impact Spatter (LVIS)

Also called Passive Impact Spatters, these are the largest bloodstain drops with a diameter of 4mm or greater. They travel at a slow speed, no greater than 1.5 m/s. They’re associated with being struck by a large, blunt instrument such as a chair or leaking from an open wound. They’re also formed when a large amount of blood has been transferred to another surface and the excess drips down.

2. Medium Velocity Impact Spatter (MVIS)

These spatters are associated with an intense beating like from a club, a hammer, a gun butt, or a bag of frozen pork chops. (Yes, I once had a homicide case where a guy’s head was caved-in with a bag of frozen pork chops.) MVIS drops are less than 4mm and get propelled at speeds between 1.5 and 7.5 m/s. The further from the target surface that blood is expelled, the larger the drops will be.

3. High Velocity Impact Spatter (HVIS)

This stain pattern is caused by gunshots, explosions, or contact with high-speed objects like having your throat cut with an electric carving knife. (Had one of those, too.) They’re evident by masses of tiny droplets less than 2mm in diameter and occur at velocities far in excess of 7.5 m/s. There’s no mistaking this type of bloodstain. The angle of impact is evident by an elongated shape – the longer the stain, the longer the angle from vertical.

Cast-Off Stains – COS are common in scenes such as Billy Ray Hennessey’s axe-murders where straight and curved lines of blood are made on the walls and ceiling by the centrifugal force of back-and-forth swings. They produce tear-shaped or oblong stains with ‘tails’ that point in the direction of travel. By reversing the line of travel, the path can be traced or stringed to its area of convergence.

 

Transfer Bloodstains – These are generally patches and smears of blood deposited secondary to the main, violent event. They say a lot about sequence. It can be when a victim tried to crawl away, the body was dragged, the perpetrator placed a bloody hand on a wall, or when he hid the axe in a closet like Billy Ray did. Tell you more about him soon.

Projected Pattern – This is from arterial damage, such as severed carotids, femorals, radials, and brachials where pressurized blood ejaculates via the still-beating heart. You’ll see groups of big to small splotches, usually in an arc pattern. Very common in stabbings.

Pooling – Usually occurs once the victim is unconscious and passively exsanguinates. That’s the fancy term for bleeding to death. Something telling to a Bloodstain Pattern Analyst is where large pools of blood occur in different locations—no doubt the body’s been moved.

Insect Stains – Not long after death, the bugs show up. They land in the bloodstains and make little tracks all over the place. These are easily confused with HVIS to the untrained eye and known in the industry as Flyspeck.

Expiration Stains – These are incidental bloodstains associated with injuries to the respiratory and abdominal tracts where a gasping victim expels through the mouth or nose. They appear diluted, more brownish in color due to mixture with saliva or mucous, and look like a fine mist.

Examination of a bloody crime scene is a slow and methodical procedure.

The area is still-photographed from wide, medium, and close-up angles as well as videoed. Each stain pattern is marked, catalogued, and a swab taken for serology or DNA typing. The patterns are then Strung to their Point Of Origin, or area of convergence, and a complex application of trigonometry begins to tell a compelling tale of just what went down.

The visual absence of blood can be misleading.

Criminals occasionally clean up a scene or there may be only a small bit of blood emitted. Chemical reactive agents like luminol and phenolphthalein can be applied which visualize latent stains. Light spectrum tools, such as LumiLights, are also used to amplify spots not visible to the naked eye.

Getting back to Billy Ray Hennessey — This guy hid in his ex’s attic with an axe for two and a half days, waiting to catch her screwing a new beau. Sure enough, she brought one home from the bar. At 3:00 am, Billy Ray crept down from the hatch, snuck into the bedroom, and chopped them to pieces. Like I said, the crime scene looked like a bomb exploded in a red paint factory.

It took us three days to catch Billy Ray. He did the right thing and fessed-up, then reenacted the murders on video. It was the coldest thing I’ve seen. Billy Ray described what he did as if he were watching Jason or The Shining, going through repeated motions of chopping, and back-swinging, and chopping some more. He demonstrated with a 2×2 stick as a prop. (We were nervous about giving him a real axe.) He showed how he modified body positions after death, where he hid his axe in the closet, and where he cleaned himself up.

Billy Ray did the right thing again. He pleaded guilty, receiving two life sentences.

During the three days that we hunted for Billy Ray, the Forensic Identification team had sealed the crime scene and independently conducted their Bloodstain Pattern Analysis. Once Billy Ray was done, we (the detective team) compared notes with the forensic team and — unbeknownst to what Billy Ray reenacted — the forensic folks got it bang-on. They’d reconstructed how many blows each victim received, various positions everyone was in, and… who fought back.

I’ve been sold on the science ever since.

*   *   *

Here links to more information on Forensic Bloodstain Pattern Analysis:

A Simplified Guide To Bloodstain Pattern Analysis

The Forensics Library – Bloodstain Pattern Analysis

Principles Of Bloodstain Pattern Analysis – Theory and Practice

Bloodstain Pattern Analysis – Crime Scene Reconstruction